The Scott Driving System

Steering and Control System All essential driving controls are brought to a single vertical control column. Forward movement of the column opens the throttle providing control of power from the engine. Returning the control column to neutral returns the throttle to idle position. Movement of the column toward the rear applies the vehicle brakes in proportion to the pressure applied to the column.

At the top of the column is a cross arm with a mini steering wheel directly in front of the center of the driver. Rotation of the wheel Left or Right steers the vehicle. All systems are amplified so that the power and range of motion required of the driver are reduced to a minimum. The system provides for a minimum of 6 ounces of force required in the fore and aft and lateral planes. For persons who do not have finger dexterity or wrist function, such as high-level spinal cord injury, a tri-pin device mounted at the top of the vertical column with a parallel arm support provided.

Autoadapt Driving Products

The Carospeed Menox Hand Control is specifically designed to give physically limited drivers the benefit of control and ease when driving a vehicle. Driving becomes an easy and enjoyable experience with Carospeed Menox.

The Carospeed Menox

Thanks to Menox's advanced design, each control is ergonomic, conforming to a person’s natural hand-wrist-arm motion. The function buttons are situated in a safe place and engineering has simplified the range of the Carospeed Menox Hand Control; pushing forward to brake, pulling back to accelerate.

view DSI Autoadapt Driving Products Brochure

CPO-5 Palm Control

The CP05 rocker switches send coded signals through an FM desired function. Three harnesses connect the vehicles electrical to the CP05 control box. The turn signals are automatically cancelled by an 8 second timer which is linked to the brake lights. If the brake lights are ON the timer resets and start after the brake lights go off.

CP05 OPERATION

• Primary Operation Press a switch, release quickly. The operation is initiated. (Residual Operation) Press a switch and hold for more than one second or until the residual operation begins.
• Right Turn (optional -Window UP)
• Wiper Low/Intermittent/Low (Wash)
• Wiper Off (Cruise)
• Left Turn (optional -Window DOWN)
• Horn
• High Beam (Flash)